|
|
Fig.17 |
Fig.18 |
| -□MDG12 |
-□MLG12 |
|
□:indicates nominal reduction ratio. EX)LGU75-4MDG12 |
| Nominal reduction ratio |
4 |
4 |
5 |
| Actual reduction ratio |
| Maximun torque |
1200[117.7] |
1200[117.7] |
900[88.3] |
| Weight（g） |
500 |
500 |
| Temperature range (℃) |
|
| Input shape |
Involute serration hole
12×11×1 |
Involute serration shaft
12×11×1 |
| Output shape |
Involute serration hole
19.5×25×0.75 |
| Input shaft penetration |
Q1 |
14 |
- |
| Output shaft penetration |
P |
6.5 |
| Fitting |
J |
Hole7-φ4.5、Key1-Width5×Depth3 |
| Directional size of diameter |
φA |
75 |
| B |
68 |
| φC |
Casing diameter (61) |
| φD |
56 |
| φE |
22 |
| φF |
22 |
| Directional size of shaft |
L1 |
24.8 |
32.6 |
| L2 |
16.4 |
| L3 |
22.6 |
| M |
6.2 |
| N |
2.2 |
| O |
2.2 |
| Q2 |
- |
10 |
| R |
1 |
| Accessory |
Accessory |
It is advisable to make the case hole into which the unit is inserted as shown below:
When assembling two or three units, connect □MAD or P(S) type output shape D to the input side, and □MLD or other input shape L to another unit.
